IOTA100 Preparative Pump
OEM built-in pump with flow rate up to 100ml/min.
Related variants
- Description
- Parameters
- Files to download 2
Iota 100 has flow-rate range 1 – 100 ml/min. Maximum operating pressure is 15 MPa (2176 PSI).
It has two pistons connected in parallel, with diameter of 3/8”. It is suited for preparative and flash applications in liquid chromatography but also for solvent pressurizing by samples extractions, etc. Beneficiary is also a very stable run even at low flow rates.
This Pump is designed as OEM / built-in unit.
There is a possibility to use this pump even at high pressure gradient mode, where are two, three or four units controlled from PC using RS232.
Control board is mounted at the unit back side therefore the installation is very easy. Only connect power voltage and RS232 and pump is ready to work.
When working with buffered solvents, it is possible to use pistons back washing.
Pump is supported with software ECOMAC and Clarity.
IOTA PUMPS are equipped with pressure sensor.
| Flow rate | 1 – 100 ml/min |
|---|---|
| Maximum operating pressure | 15 MPa (2176 PSI) |
| Flow rate setting | 1 ml/min steps |
| Repeatability of flow rate adjusting | ± 1 % |
| Accuracy of flow rate setting | ± 2 % |
| Wetted materials | stainless steel, PEEK, ceramic, seals |
| Communication | RS232 |
| Power supply | 24 – 36 V DC |
| Power input | 100 W |
| Dimensions W x H x D | 212 x 153 x 338 mm |
| Weight | 7 kg |
| Output capillary outer diameter | 1/16” |
| Upper pressure limit (MPa) | 0.1 – 15 (2176PSI) |
| Filename | Type |
|---|---|
| Info-Iota50_100_300_pump-cz-03.pdf | pdf (171,67 KB) |
| Info-Iota50_100_300_pump-en-03.pdf | pdf (170,24 KB) |
Related products
Piston seal 3/8" U-R325 HB (CC)-204-GFP-HST
For pump types ECP2050/2200/2300, Theta and Iota.
Piston seal 3/8" U-325 MB-204-T-316
For pump types ECP2050/2200/2300, Theta and Iota.
ECOM is a global supplier of scientific and laboratory instruments for liquid chromatography. The company was established in October 1991 and it is focused on research, development, and manufacturing of scientific and laboratory equipment for liquid chromatography. Our innovative R&D and dynamic processes allow us to quickly react on customer’s needs and to propose customised products and solutions. ECOM’s focus on high quality products and responsive service supports high performance of its customers.
About Us
