TERMOVAP TV 10+ Sample Concentrator

Concentrating of samples is widely used in combination with solid phase extraction (SPE) in analyses of environmental samples (determination of polycyclic aromatic hydrocarbons, biphenyls, chlorophenols, pesticides, etc.).
Availability
This product cannot be purchased.
Manufacturer
ECOM spol. s r.o.
Part number
TV100000
It is used method of concentrating dissolved samples by solvent evaporation using introduction of controlled gas flow above the level of the solution with temperature control.

 

Main features:

  • simultaneous treatment of up to twelve samples
  • gas supply to each vial equipped with a valve
  • easy handle
  • height adjustable gas distribution part
  • usually are used 10 mL reactions vials with conical bottom
  • for smaller and non standard vials are supplied reductions
  • Termovap is equipped by safety fuse „ +10°C ”
  • unit is controlled by keyboard or using RS232
  • concentrating with temperature control and gas introduction above solution surface

 


  

Power input 190 VA
Supply voltage 230 V ± 10%, 50 Hz
Dimensions W x H x D 580 x 110 x 140 mm
Number of operation positions 12 (gas inlet to every position equipped with a valve)
Temperature Range Ambient to 99°C
Accuracy of setting ± 0.5°C
Temperature setting in 1°C steps
Temperature difference between individual positions ± 1°C
Temperature stability ± 0.5°C
Vials 10 ml
Weight 7.4 kg
Filename Type
Info-TV10plus_termovap-en.pdf pdf (176,38 KB)