Preparative external cell PLCC 15 EX
External, connected by optical cable upto 500 ml/min. For detectors Flash 06S DAD 400 Ex, Flash 06S DAD 600 Ex, Flash 06S DAD 800 Ex, Opal Ex and Sapphire Ex
Unique construction of the cell enables optical path change according to specifications of particular analysis, starting at 0.3 up to 2.4 mm. Cell volume is 40, 55 or 70 µl for selected optical path length. Maximum flow rate is 500 ml/min.
The cell is designed for preparative or flash applications. Incoming capillaries with external diameters 1/8” or 1/16” can be connected using a thread ¼”-28 and a ferrule.
The cell is assembled outside of detector and is connected with the unit by an optical fiber cable. Therefore it is used in explosion or contamination hazard applications.
UV Detectors for this cell signal evaluation have to be assembled with SMA output and input connectors. See detectors produced by ECOM with optical connectors.
Technical parameters
Optical path / volume
0.3 ± 0.05 mm / 40 µl
1.3-1.4 mm / 55 µl
2.3-2.4 mm / 40 µl
Cell connection
thread ¼“-28; tubes OD 1/6“ or 1/8“
Maximum flow rate
500 ml/min.
Wetted materials
PTFE; fused quartz; stainless steel
Casing dimensions
Diameter 36 mm; length 27 mm
Weight
150 g
|
Optical path / volume
|
0.3 ± 0.05 mm / 40 µl
1.3-1.4 mm / 55 µl
2.3-2.4 mm / 40 µl
|
|
Cell connection
|
thread ¼“-28; tubes OD 1/6“ or 1/8“
|
|
Maximum flow rate
|
500 ml/min.
|
|
Wetted materials
|
PTFE; fused quartz; stainless steel
|
|
Casing dimensions
|
Diameter 36 mm; length 27 mm
|
|
Weight
|
150 g
|
