Certification stamp
Products / UV-VIS Detectors / Analytical

ECD2600 UV-VIS detector

ECD2600 click to zoom Catalog No.: ADB0000X

Variable wavelength 190 up to 600 nm, high speed sampling 100Hz


This detector has continuously variable wavelength in the range of 190-600 nm and noise level is ± 3·10-6 AU. Sampling adjustable up to 100Hz speed.

The unit may be used for analytical applications as well as for preparative/flash chromatography, according to the selected cell.

It is easy to operate; light intensities for reference and sample channels are available for detector diagnostics as well as information on lamp operating hours. The detector performs automatic wavelength calibration after the lamp has been switched on. High standard deuterium lamp in a special socket enables easy exchange.

Output signal is available in both digital and analogue form. Detector could be controlled and used together with Clarity or ECOMAC software via RS232 or Ethernet interface.

Cell could be easily removed from the front of the unit. Flow cell AC05 is included as component of the detector.


Technical parameters

Wavelength range
190 - 600 nm
Spectral half-width
6 nm
Accuracy of adjustment
± 1 nm
Reproducibility ± 0.5 nm
Light source
Deuterium discharge lamp and halogen lamp
Noise (Test cell, 254 nm, TC 1 s, 10Hz) ± 3·10-6 AU
Drift (Test cell, 254 nm) 1·10-4 AU/hr.
Time constant
20 - 10 000 ms
Sampling rate
up to 100 Hz
Digital output
1 V/AU
Analog output
1 x configurable
Wetted materials
depend on a cell - PTFE, fused silica, stainless steel, Vespel, PEEK
Communication RS232, Ethernet(LAN)
Display, keypad
VFD 140x32 pixels, 10 pushbuttons
Power supply
100-240V 50/60Hz 110VA
Dimensions (w x h x d) 280 x 135 x 498 mm
Weight 9 kg

Are you sure to logout?


Are you sure to remove all items from shopping cart?