Box with Degasser DG 4014 four channels
On-line (continuous) mobile phase degasing up to 10 ml/min
Box with Degasser DG 4014 is a container for solvent bottles with build-in a high-efficiency degasser that removes dissolved gasses from HPLC solvents. Its unique design assures reliable continuous operation and the highest level of continuous performance available without the need for helium degassing. Up to four solvent lines may be degassed simultaneously by one unit. The extremely low internal volume of each Teflon AF® channel (480 microliters) offers very quick equilibration and very short startup times compared with PTFE degassing channels which have the same degassing efficiency.
This product has been designed for use with 220 mm wide ECOM units. Up to 4 mobile phase reservoirs LCT 02 may be put into the box.
Technical parameters
| Channels | 1-4 independent |
| Degassing Process | Gas permeation through a fluoropolymer membrane |
| Maximum Flow Rate | 10 mL/min. |
| Degassing Capacity | ~2 ppm at 1 mL/min. |
| Dead Volume | ~480 microliters per channel for standard channel |
| Materials contacting solvents | PEEK, Glass-filled PTFE, Teflon AF® |
| Power requirement if using supplied AC Adapter | 100 to 240 VAC (±10%), 1A, 50 to 60 Hz (±3 Hz) |
| Wall Sockets 4 supplied with AC interchangeable | North America/Japan, U.K., Continental Europe, Australia |
| Installation Over-Voltage | Category II |
| Operating Conditions | Ambient Temperature 10 to 35 ºC |
| Ambient Relative Humidity (RH) | 20 to 80 % RH (without condensation) |
| Altitude | 0 to 2000 Meters |
| Pollution Degree | 2 |
| Inside box dimensions HxWxD | 59mm x 228mm x 217mm |
| Dimensions HxWxD | 3.23" x 9" x 14.17"(82mm x 230mm x 360mm) |
| Weight | 6 lb.(3 kg) |
