Search
Products
Information
Panther 1000 - Precise A/D converter
Description
Panther 1000 is an external 24 bit analog-digital converter suited for equipments with analogue voltage output only. It convert analogue signal to digital signal convenient for PC. Panther 1000 is supported by ECOMAC SW for data displaying, storing, exporting and printing.
Main features:
- Converter is connected with PC using USB interface for data transfer just as for power supplying. ( It is not necessary to use additional power supply)
- Unit work in tree bipolar voltage range so that it cover measuring from ±125mV up to ±12.5V FS. Thanks high dynamical range is it possible to measure voltage one digit lower
- Originally unit design allow chose measuring speed range up to 1000 SPS
- Analogue input circuits are full galvanic separated from other circuits so that unit allow measuring with excellent signal/noise ratio
These features allow using this converter for very sensitive equipments with analogue signal output not only in HPLC.
Specification
Technical parameters:
| Parameter | Value (Conditions) |
| Digital resolution | 24-bit |
| Voltage ranges | ± 125 mV, ±1.25 V, ±12.5 V |
| Sampling speed | 5, 10, 20, 50, 100, 200, 500 and 1000 sps |
| Measurement accuracy | ±0.01% FS (5 sps) |
| Noise | typ. 1.2 µV (±1.25 V, 5 sps) typ. 40 µV (±1.25 V, 1000 sps) Noise free region is 21 bit. |
| Input impedance | 750 kohm (±125 mV, 5 sps) 750 kohm (±1.25 V, 5 sps) 82 kohm (±12.5 V, 5 sps) |
| Maximum permanent overload of the analog input | ±50 V |
| Maximum short-time overload of the analog input | ±150 V (max 10 sec) |
| Overload signalization | by software, by hardware - LED |
| Power supply from USB | 75 mA (typ., ±1.25 V, 5 sps) |
| Dimensions | 62 x 25 x 110 mm |
