Analytical/Semipreparative injection valve

It is a stainless steel two-position valve with needle injection port on the front side.

Availability
Categories
Manufacturer
Ecom
Part number
AVE02006

This valve offers the No-Flow-Interruption technology which reduces pressure spikes during position switching to a minimum. It has a built-in position sensor for starting data acquisition precisely at the point of injection.

The stator of the valve is made of stainless steel and features the Nitronic 60 coating on its working face which not only protects the contact surface from wear but also improves the abrasion of the stator and rotor.

The needle port can be used with standard microliter syringes (e.g. Hamilton) or plastic type blunt syringes (with PST3 needle point style) with 0.7mm needles.

The valve is standardly delivered with polymeric Valcon H rotor seal.

Inside hole diameter d = 0.4 mm
Loop volumes 2 uL – 5 mL
Starting switch YES
Capillary Connection UNF 10-32 standard thread
Control manual
Maximum operating pressure 34.5 MPa / 345 bar / 5 000 PSI
Dimensions W x H x D d = 35 mm / 62 mm
Filename Type
Info-Valve_analytical-en.pdf pdf (78,55 KB)