Cells for TOY18DAD-H / -L and FLASH14DAD detectors

These cells are suited for TOY14DAD and TOY18DAD-H / -L detectors.

Preparative cells are produced in four versions with optical path length of 0.1, 0.3, 1.3 and 2.4mm from stainless steel or PEEK. Standardly are the detectors supplied with PLCC15L cell. Upon customer request can the detector be delivered with other cells as you can see below. Cell connection is typically ¼”-28 for 1/8” tubing but can be also UNF10-32 for 1/16” capillaries or 5/16” for 3/16” tubing.

Analytical cells - even though the TOY14DAD and TOY18DAD-H / -Ldetectors were designed for preparative applications, they can be supplied with analytical cells too, but they do not achieve such sensitivity (signal/noise ratio) as classical PDA analytical detector

Among accessories is added a Test cell, which has the same shape as measuring cells, but it does not have any window. It is used for detector testing to detect if there is a problem with mobile phase, cell or with the detector.

 

Page 1 from 1

Preparative cell in bracket PLCC15L

Part number: ANA9400X
l=0,3mm; tubing with OD 1/8" and thread 1/4" - 28
This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Preparative cell in bracket PLCC19L

Part number: ANA8100X
 l=2,4mm; tubing with OD 1/8" and thread 1/4" - 28
This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Preparative cell in bracket PLCC07L

Part number: 25L0000X
l=0.3mm; tubing with OD 1/16" and thread UNF10-32
This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Preparative cell in bracket PLCC07L PEEK

Part number: 25LP000X
l=0.3mm; tubing with OD 1/16" and thread UNF10-32
This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Preparative cell in bracket PLCC15L PEEK

Part number: ANA94L0X
l=0,3mm; tubing with OD 1/8" and thread 1/4" - 28
This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Preparative cell in bracket PLCC17L

Part number: ANA9300X
l=1,3mm; tubing with OD 1/8" and thread 1/4" - 28
This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Preparative cell in bracket PLCC 19L PEEK

Part number: ANAL000X
l=2.4mm; tubing with OD 1/8" and thread 1/4"-28
This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Analytical cell in bracket HPLC 09 PEEK

Part number: ANA97000

l=10mm; tubing with OD 1/16" and thread UNF 10-32

This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Analytical cell in bracket HPLC 09 PEEK Sapphire g..

Part number: ANA970S0

l=10mm; tubing with OD 1/16" and thread UNF 10-32; Sapphire glass

This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

High pressure cell in bracket PLCC HP08L PEEK

Part number: ANAHP080

l=1 mm; tubing with OD 1/8" and thread 5/16"-24

This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

High pressure cell in bracket PLCC HP16L PEEK

Part number: ANAHP160

l=1 mm; tubing with OD 1/16" and thread UNF 10-32

This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD

Preparative cell in bracket PLCC3L L

Part number: ANA9203X
 l=0.3mm; tubing with OD 3/16" and thread 5/16"-24
This cell is used in detectors TOY18DAD-H, TOY18DAD-L, TOY14DAD, and FLASH14DAD