Analytical External Cell AFC 05 EX PEEK
l=5 mm - 1/16" - std. HPLC thread UNF 10-32
External, for: Flash, TOYDAD, TOYFIX and ECD detectors
- Description
- Parameters
The AFC 05 EX PEEK analytical flow cell is a revolutionary device designed for use with Flash, TOYDAD, and TOYFIX and ECD analytical series of ECOM detectors. With a volume of only 10 µl and an optical path of 5 mm, this cell provides accurate and reliable measurements in various applications.
Improved design for maximum efficiency
The conical design of the cell minimizes the influence of the flow rate and temperature changes, ensuring stable and consistent results. Unlike previous cell types, the AFC 05 EX is supplied without capillaries, allowing the user to select the appropriate inner diameter of the capillary. This allows flow rates of up to 50 ml/min to be achieved, providing flexibility for different applications.
Optimized for low flow rates
For applications where the flow rate is less than 10 ml/min, a hydrodynamic resistor is available to eliminate bubble formation. This component is connected to the output capillary, ensuring stable operation and high accuracy even at low flow rates.
Safety and flexibility of use
The cell is mounted outside the detector and connected to the instrument via a fiber optic cable. This design ensures safe use in applications where there is a risk of explosion or contamination. With our instrument, you can work with confidence. Knowing that your measurements are not only accurate but also safe.
Why choose the AFC 05 EX flow cell
- High measurement accuracy with minimal effect from ambient conditions
- Flexible configurations to adjust flow rates to suit your needs
- Safety design for use in demanding environments
- An ideal choice for a wide range of applications including chemical analysis and environmental monitoring
Volume/optical path length | 10 µl / 5 mm |
---|---|
Material | fused silica; PEEK |
Maximal flow rate | 50 ml/min |
Connecting thread | UNF 10-32 |
Dimensions W x H x D | Diameter 36 mm, Length 29 mm |
Maximum operating pressure | 2 MPa |