AS96 Autosampler

New Product

Automatic autosampler for 96 vials with cooling and heating

Availability
Categories
Manufacturer
-
Part number
ASA96000

A reliable and precise autosampler for a wide range of applications in HPLC and LC-MS with cooling and heating, in compact design. 

ParameterValue
Injection modes Full-loop, Partial loop-fill , µL-pick-up
Injection volume Programmable from 0 µl – 9999 µL 1 µL increments
Injection precision Full-loop injection ‹ 0.3% RSD; Partial loop-fill ‹ 0.5% RSD; µL -pick-up ‹ 1.0% RSD
Sample viscosity 0.1 – 5 cP
Injections per vial/well Max 9
Syringe volume 500 µL standard; 250, 1000 and 2500 µL optional

Needle wash
Inside and outside needle wash with drying. Wash can be programmed between injections and between vials/wells.

1 solvent
5 additional wash solvents
Injection cycle time 60 seconds
Valve switching time 60 msec
Wetted parts SS316, PTFE, TEFZEL, VESPEL, glass, For Bio-kit option: PEEK and coated-steel (needle) instead of SS316
Carry-over ‹ 0.05% with standard wash
Typically ‹ 0.01% with extra wash
Sample capacity Microtiter plates: 2; Vials: 2x 48 (1.5 mL) or 2x 12 (10 mL) - optional
Maximum vial/MTP height 47 mm
Sample cooling -Factory installed option (Peltier technology) Minimum: 4°C ± 2°C Maximum: ambient temp -3°C
Syringe volume 500 µL standard; 250, 1000 and 2500 µL optional
Wetted materials SS316, PTFE, TEFZEL, VESPEL, glass, For Bio-kit option: PEEK and coated-steel (needle) instead of SS316
Loop volumes Programmable from 0 µl – 9999 µL 1 µL increments
Sample Capacity Microtiter plates: 2; Vials: 2x 48 (1.5 mL) or 2x 12 (10 mL) - optional
Injection volume Programmable from 0 µl – 9999 µL 1 µL increments
Injection Precision Full-loop injection ‹ 0.3% RSD; Partial loop-fill ‹ 0.5% RSD; µL -pick-up ‹ 1.0% RSD
Filename Type
Info-AS96_Autosampler_en pdf (184,21 KB)