Cells for TOY20DAD-H / -L, TOY18DAD-H / -L and FLASH14DAD detectors

These cells are suited for TOY14DAD, TOY18DAD-H / -L and TOY20DAD-H/ -L detectors.

Preparative cells are produced in four versions with optical path length of 0.1, 0.3, 1.3 and 2.4mm from stainless steel or PEEK. Standardly are the detectors supplied with PLCC15L cell. Upon customer request can the detector be delivered with other cells as you can see below. Cell connection is typically ¼”-28 for 1/8” tubing but can be also UNF10-32 for 1/16” capillaries or 5/16” for 3/16” tubing.

Analytical cells - even though the TOY14DAD, TOY18DAD-H / -L and TOY20DAD-H/ -L detectors were designed for preparative applications, they can be supplied with analytical cells too, but they do not achieve such sensitivity (signal/noise ratio) as classical PDA analytical detector

Among accessories is added a Test cell, which has the same shape as measuring cells, but it does not have any window. It is used for detector testing to detect if there is a problem with mobile phase, cell or with the detector.

 

Page 1 from 1