Communication of all units is through RS232 or Ethernet(LAN). An additional PC A/D converter card is not required for this system.
The system contains a manual injector and the Clarity System contains a manual injector and Clarity software. All units are supported in Clarity software from installation.
A wireless mouse and keyboard set (P/N: EPC-0028), PC (P/N: EPC-0026) and a computer monitor (P/N: EPC-0027) can be purchased with the system.
ECD2600 UV-VIS DETECTOR
Detector with a continuously variable wavelength in the range of 190-600 nm and a noise level ±3·10-6 AU. The unit offers high-speed sampling up to 100 Hz and wavelength autocalibration. AC 05 analytical cell is included.
ECO2099 COLUMN OVEN WITH HEATING
This column oven allows temperature stabilization above ambient temperature. A big compartment room
can accommodate up to 3 columns with lengths up to 25 cm. Overheating- Security-Fuse prevents the destruction of temperature-sensitive columns. The temperature range is ambient temperature +5°- 99 °C.
ECP2010 ANALYTICAL HPLC PUMP
This isocratic pump works with Gradient Box ECB2004B as a quaternary gradient pump. The flow rate range is 0.02-10.00 ml/min and the pressure limit at 40 MPa. Unit software includes a new learning algorithm for pulsation suppression and many testing and diagnostic functions.
ECB2004B GRADIENT BOX WITH DEGASSER
The box is suited for handling liquids in ECOM gradient systems. It accommodates a container for solvent bottles, a built-in high-efficiency vacuum degasser, and a four-way gradient valve. Up to four solvent lines may be degassed simultaneously by one unit. A four-way gradient valve is controlled from the pump ECP2010.
CLARITY CHROMATOGRAPHY SOFTWARE
This system is fully controlled by Clarity Chromatography software, which is also a part of delivery. Clarity software complies with CFR21GLP requirements.
|ECD2600 UV-VIS Detector
|ECB2004B Gradient box with degasser
|ECP2010 Analytical HPLC pump
|ECO2099 Column oven with heating
|Clarity – Station for 1 instrument
|Clarity module for HPLC control
|Analytical/semipreparative injection valve 1/16 " with 20 ul sample loop and connector
|Accessories for analyt. system series 2000
Note: Column and computer are not included. PC system has to be equipped for handling 3 serial RS232 or 1 Ethernet port at least. Check also Clarity software requirements.