LED20 Dual UV Detector
The LED20 Dual UV detector with UV Light Emitting Diodes (LED) as the light source is an OEM-built-in UV detector for preparative and flash chromatography.
Related variants
- Description
- Parameters
- Files to download 1
The LED20 Dual UV detector with UV Light Emitting Diodes (LED) as the light source is an OEM-built-in UV detector for preparative and flash chromatography.
The dual UV detector version measures at two fixed wavelengths, which are adjusted in production and given by the built-in LEDs.
By default, diodes with wavelengths of 255 and 280 nm are used. Optionally, the customer can select a wavelength in the range of 255–600 nm in steps of 5 nm.
The unit is controlled by an innovative PCB board that powers the LEDs and controls the unit, and has many new features, including a higher sampling speed.
The key features of the LED20 detectors:
- Small dimensions
- Low cell heating due to the low power losses of the LEDs
- Easy flow cell replacement
- Sophisticated diagnostic software
Number of channels (Signals) | Two fix wavelengths |
---|---|
Typical spectral half-width | 10 nm |
Light source | LEDs |
Noise level at test cell (254 nm, TC 0.75 s) | ± 5x10-6 AU |
Drift at test cell (254 nm after 1 h) | 1x10-3 Au/hr |
Communication | Remote digital I/O |
Diode peak wavelength | ± 5 nm |
Power supply | 12-24 V DC |
Power input | 4 W |
Materials in contact with mobile phase | FEP; fused silica; stainless steel (cell) |
Optical cables | no |
Dimensions W x H x D | 125x65x62 mm (4.92x2.56x2.44 in) |
Weight | 0.5 kg (1.10 Ib) |
Filename | Type |
---|---|
Info-LED20_detector-en | pdf (239,91 KB) |
