Preparative External Cell PLCC15 EX has a unique design with an optical length of 1.3 mm. Thanks to the construction of the bypass, it prevents the formation of bubbles. It is designed for preparative or flash applications and it is possible to connect it using tubing with OD 1/8" and thread 1/4"-28 with a flat bottom. Internal volume of preparative cell is 40 µl. Maximum flow rate is 500 ml/min.
Optical design allows installing the cell out of the detector. The light beam is led from the detector and back using optical cables with SMA 905 connectors. It is necessary to use low solarization cables to avoid damage by UV light. The suggested cable length is 1 – 2 m because the longer cable the higher the light losses. The external cell is equipped with two M3 screws for fixing in your workplace.
See more products on our website or contact us if you are looking for different cell parameters and materials. We are keen to design cells according to your needs. Also available in configurations made of certified bio-inert materials.
|Volume/optical path length||40 µl/0.3 mm|
|Wetted materials||Stainless steel, quartz, FEP|
|Body material||Stainless steel|
|Maximal flow rate||500 ml/min|
|Tubing OD diameter||1/8"|
|Connecting thread||¼“-28; tubes OD 1/8“|
|Maximum operating pressure||2 MPa (290 psi)|