Separtrix PP03 Preparative Pump
Piston pulse-less pumps for prep chromatography
- Description
- Files to download 1
Separtrix PP03 are pulse-less triplex piston pumps designed for preparative chromatography applications - nevertheless, they can be used everywhere, where high pressure, precise flow without pulsations, and high resistance against corrosion are needed. Pumps are equipped with unique compact three-piston head for smooth flow and easy maintenance without a risk of leakage on connecting parts. Back flushed pistons are covered by a hard and chemically resistant polycrystalic carbon layer. Piston cylinders have low dead volume and samples injected through the pump appear low spreading.
Pumps with different flow rate ranges differ only in head type, piston diameters, and tubing diameters. Separtrix PP03 are usually supplied with an asynchronous motor and frequency converter but are also available with a step motor which allows the use of the pump in an extremely broad range of flow rates - both for analytical and preparative applications.
Special configurations of Separtrix PP03 pumps are used for three phases low pressure gradient – in this case is extremely important that these pumps offer a nearly constant flow rate not only on the output but on the input too. Low-pressure gradient units are delivered with three solenoid valves on the plate which can be connected to the pump side. The power supply for valves is installed inside the pump box. 10 linear steps can be programmed.
Separtrix PP03 pumps are delivered in configuration for high-pressure binary gradient as well. Two pumps – master and slave types – are working together. The master pump controls the flow rate and gradient composition (10 linear steps), slave pump is delivered without a control display, keyboard(s), and pressure sensor. All Separtrix PP03 pumps are equipped with keyboard(s) and graphic display. There is a possibility to set flow rate, pressure limit, and flow correction. A second keyboard is included for gradient programming in the case of low-pressure gradient pumps and high-pressure gradient master pumps.
Separtrix PP 03 can be used in the mode of remote control. Pumps can cooperate with the Clarity data station (Dataapex). Flow rate, gradient composition, and pressure limit can be programmed. The control module for PP 03 pumps was successfully tested and agreed upon by Dataapex. PP 03 pumps can be controlled using Ecom software ECOMAC as well.
| Type | Description & technical parameters |
| SEPARTRIX PP03 A | Piston pulsless pump, three pistons O.D. 10 mm with a diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor vector frequency converter, flow rate 25 ml/min. – 800 ml/min., 260 bar (3500 PSI), pressure measurement and limit, membrane keyboard, graphic display |
| SEPARTRIX PP03 B | Piston pulsless pump, three pistons O.D. 14 mm with diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor with vector frequency converter, flow rate 50 ml/min. – 1600 ml/min., 160 bar (2100 PSI), pressure measurement and limit, membrane keyboard, graphic display |
| SEPARTRIX PP03 C | Piston pulsless pump, three pistons O.D. 20 mm with diamond layer in one stainless steel head, ceramic ball valves, 620 W AC motor with vector frequency converter, flow rate 100 ml/min. – 3200 ml/min., 80 bar (1100 PSI), pressure measurement and limit, membrane keyboard, graphic display |
| SEPARTRIX PP03 AG | PP03 A pump, flow rate 25 ml/min. – 800 ml/min., max. 260 bar (3500 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder + 3 x valve power supply in pump unit), second keyboard for gradient control |
| SEPARTRIX PP03 BG | PP03 B pump, three phases, flow rate 50 ml/min. – 1600 ml/min., max. 150 bar (2100 PSI), low-pressure gradient included (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient control |
| SEPARTRIX PP03 CG | PP03 C pump, flow rate 100 ml/min. – 3200 ml/min., 80 bar (1000 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient control |
| SEPARTRIX PP03S A | Piston pulsless pump, three pistons O.D 10 mm with diamond layer in one stainless steel head, ceramic ball valves, step motor, flow rate 1 ml/min. – 400 ml/min., 250 bar (3500 PSI), pressure measurement and limit |
| SEPARTRIX PP03S B | Piston pulsless pump, three pistons O.D 14 mm with diamond layer in one stainless steel head, ceramic ball valves, step motor, flow rate 1 ml/min. – 800 ml/min., 150 bar (2100 PSI), pressure measurement and limit, membrane keyboard, graphic display |
| SEPARTRIX PP03S C | Piston pulsless pump, three pistons O.D 20 mm with diamond layer in one stainless steel head, ceramic ball valves, step motor, flow rate 2 ml/min. – 1600 ml/min., 70 bar (800 PSI), pressure measurement and limit, membrane keyboard, graphic display |
| SEPARTRIX PP03S AG | PP03S A pump, flow rate 1 ml/min. – 400 ml/min., 250 bar (3500 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient control |
| SEPARTRIX PP03S BG | PP03S B pump, flow rate 1 ml/min. – 800 ml/min., 150 bar (2100 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient control |
| SEPARTRIX PP03S CG | PP03S C pump, flow rate 2 ml/min. – 1600 ml/min., 70 bar (800 PSI), three phases low-pressure gradient included, (3 x solenoid valves + connecting armature on own holder+3 x valve power supply in pump unit), second keyboard for gradient control |
| SEPARTRIX PP03SM A | PP03S A pump, flow rate 0,5 ml/min. – 400 ml/min., 250 bar (3500 PSI), master pump for binary high-pressure gradient, second keyboard for gradient programming |
| SEPARTRIX PP03SM B | PP03S B pump, flow rate 1 ml/min. – 800 ml/min., 150 bar (2100 PSI), master pump for binary high-pressure gradient, second keyboard for gradient programming |
| SEPARTRIX PP03SM C | PP03S C pump, flow rate 2 ml/min. – 1600 ml/min., 70 bar (800 PSI), master pump for binary high-pressure gradient, second keyboard for gradient programming |
| SEPARTRIX PP03SS A | PP03SS A pump, flow rate 0,5 ml/min. – 400 ml/min., 250 bar (3500 PSI), slave pump for binary gradient, no display, no keyboard |
| SEPARTRIX PP03SS B | PP03SS B pump, flow rate 1 ml/min. – 800 ml/min., 150 bar (2100 PSI), slave pump for binary gradient, no display, no keyboard |
| SEPARTRIX PP03SS C | PP03SS C pump, flow rate 2 ml/min. – 1600 ml/min., 70 bar (800 PSI), slave pump for binary gradient, no display, no keyboard |
| Filename | Type |
|---|---|
| Info-ECOM-Separtrix_pumps-en | pdf (250,94 KB) |
ECOM is a global supplier of scientific and laboratory instruments for liquid chromatography. The company was established in October 1991 and it is focused on research, development, and manufacturing of scientific and laboratory equipment for liquid chromatography. Our innovative R&D and dynamic processes allow us to quickly react on customer’s needs and to propose customised products and solutions. ECOM’s focus on high quality products and responsive service supports high performance of its customers.
About Us
