TERMOVAP TV 10+ Sample Concentrator
Concentrating of samples is widely used in combination with solid phase extraction (SPE) in analyses of environmental samples (determination of polycyclic aromatic hydrocarbons, biphenyls, chlorophenols, pesticides, etc.).
- Description
- Parameters
- Files to download 1
It is used method of concentrating dissolved samples by solvent evaporation using introduction of controlled gas flow above the level of the solution with temperature control.
Main features:
- simultaneous treatment of up to twelve samples
- gas supply to each vial equipped with a valve
- easy handle
- height adjustable gas distribution part
- usually are used 10 mL reactions vials with conical bottom
- for smaller and non standard vials are supplied reductions
- Termovap is equipped by safety fuse „ +10°C ”
- unit is controlled by keyboard or using RS232
- concentrating with temperature control and gas introduction above solution surface
Power input | 190 VA |
---|---|
Supply voltage | 230 V ± 10%, 50 Hz |
Dimensions W x H x D | 580 x 110 x 140 mm |
Number of operation positions | 12 (gas inlet to every position equipped with a valve) |
Temperature Range | Ambient to 99°C |
Accuracy of setting | ± 0.5°C |
Temperature setting | in 1°C steps |
Temperature difference between individual positions | ± 1°C |
Temperature stability | ± 0.5°C |
Vials | 10 ml |
Weight | 7.4 kg |
Filename | Type |
---|---|
Info-TV10plus_termovap-en.pdf | pdf (176,38 KB) |
© 2019 ECOM spol. s r.o., Trebonicka 239, Chrastany u Prahy, CZ 252 19, Czech Republic
Made by Elasticr